Darlac Expert Geared Bypass Tree Pruner & Saw DP1563
The triple pulley system reduces the effort by a factor of three meaning that only 33% of the normal effort is necessary. The gearing mechanism also greatly reduces the amount of effort required, along with the 4mm steel blade coated which reduces friction.
The rope applies downward force to the tip of the lever arm which in turn moves the bypass blade which will sever branches up to an astounding 30mm with ease.
The toggle is easily adjusted moving them back to the top.
Comes with a traditional saw blade, 120mm diameter.
Use Bypass tools for fine pruning, Anvil for hard or dead wood.
To attach the head to a pole move the lower pulley arm away from the base and insert into the pole. The locking pin will now swivel into the top of the pole as the first safety clip is applied. Move the lower pulley arm back up so that it clips firmly over the pole and apply the second safety clip. The head is now secure.
Attach the two pulley clips to the middle and lower sections of the pole, this will keep the rope in line with the pole to reduce chance of it being caught in the branches. It also keeps the puller from swinging away if you let go.
The 300mm saw blade attaches easily to the pruning head with one wing nut for larger branches.
Prolong effective use with regular care. Remove sap after use. Oil and sharpen as necessary and store in a dry place.
Max cut 30mm, max saw cut 150mm
Triple pulley system reduces effort by a factor of three reducing the required effort to a third.
Gearing offers more power with less effort.
Easy attach saw blade
Bypass action for the cleanest cut
Pulley clips prevent the rope from straying
Bypass Pruner 30mm
Chrome plated steel body for rust resistance.
Delivery just £4.98 per order*!
Free Delivery if just ordering nematodes
*Additional charges may apply to certain orders in highlands and islands, if so this will be applied in the checkout