Darlac Expert Razor edge Saw DP1565
The Darlac Razor Edge saw is a 390mm tri-edge saw with 6.5 teeth per 30mm. The blade is taper ground to offer minimal friction which reduces drag; the tri edge teeth are precisely sharpened on three different plains for outstanding performance.
Cutting on the pull stroke provides maximum control with minimal effort and leaves a really smooth surface to reduce the risk of die back disease.
The upper sickle can be used to cut vines or assist in dislodging severed branches which are caught up.
The lower sickle is used to undercut the branch to help reduce the strip back when the branch is severed. Both sickles help to prevent slipping out of the cut which is especially useful when working at height where visibility is limited.
Can be used with:
DP1566 Saw Handle
DP1560 Pole (up to 5m reach)
DP1570 Pole (up to 7m reach)
Use the upper sickle to cut vines or dislodge severed branches that have become caught up. The lower sickle is used to undercut the branch to avoid strip back when the branch is severed.
Prolong effective use with regular care. Remove sap after use. Oil and sharpen as necessary and store in a dry place.
Constructed from SK-5 high carbon steel and chrome plated for resin & rust resistance
390mm tri-edge saw with 6.5 teeth per 30mm
Cuts on the pull stroke for more control with less effort
Use the upper sickle to cut vines or dislodge severed branches that have become trapped.
The lower sickle is used to undercut the bark which helps avoid bark stripping
Comes with a protective guard
Length 18'', Plastic cover for protection. Superior quality for professional use.
Delivery just £4.98 per order*!
Free Delivery if just ordering nematodes
*Additional charges may apply to certain orders in highlands and islands, if so this will be applied in the checkout